MD380/RT3 firmware update issue

A Place to ask about the TYT range of radios
M6IGJ
Posts: 3
Joined: Thu Aug 25, 2016 11:22 am
Call Sign: M6IGJ

MD380/RT3 firmware update issue

Postby M6IGJ » Thu Feb 09, 2017 10:21 am

Hi there. I've tried updating my firmware to the hacked version... But in short, i'm not winning.

I've followed the instructions as described on the below website, and everything seems to work just fine... but once I use the radio again, nothing has changed... Any suggestions?

Thanks.

Gareth
03.020 - V01.30

http://www.g0hwc.com/tyt-md-380-dmr-rad ... mware.html

Tyrbiter
Posts: 46
Joined: Wed May 25, 2016 12:05 pm
Call Sign: G8SEZ

Re: MD380/RT3 firmware update issue

Postby Tyrbiter » Thu Feb 09, 2017 3:53 pm

I think you would do better to try the newer versions you can find here:

http://www.foxhollow.ca/DMR/?menu=experimental

the early 2016 firmware versions are now ancient.

When programming you need to put the radio into DFU mode with the PTT and top side key pressed before powering on.

I hope the rest should be self-explanatory.
Brian


Return to “TYT”

Who is online

Users browsing this forum: No registered users and 1 guest