Page 1 of 1

MD380/RT3 firmware update issue

Posted: Thu Feb 09, 2017 10:21 am
by M6IGJ
Hi there. I've tried updating my firmware to the hacked version... But in short, i'm not winning.

I've followed the instructions as described on the below website, and everything seems to work just fine... but once I use the radio again, nothing has changed... Any suggestions?

Thanks.

Gareth
03.020 - V01.30

http://www.g0hwc.com/tyt-md-380-dmr-rad ... mware.html

Re: MD380/RT3 firmware update issue

Posted: Thu Feb 09, 2017 3:53 pm
by Tyrbiter
I think you would do better to try the newer versions you can find here:

http://www.foxhollow.ca/DMR/?menu=experimental

the early 2016 firmware versions are now ancient.

When programming you need to put the radio into DFU mode with the PTT and top side key pressed before powering on.

I hope the rest should be self-explanatory.

Re: MD380/RT3 firmware update issue

Posted: Mon Feb 19, 2018 7:53 pm
by Novice
I have upgraded the MD380 and it is very very good. Both of these links give details - http://www.va3xpr.net/programming-software-firmware/ http://www.g0hwc.com/tyt-md-380-dmr-rad ... mware.html

Good Luck
Ian